Instrumentation
PCU
- Pump Control Unit - Pump monitoring and level control
Overview
- protection of your pump
- Alarm signal before pump failure
- Different sensors can be connected: pressure, temperature and level
- Processing of sensor values and transmission to a higher-level system
- Connection of shielded sensor cables possible
- Wide-range power supply 100-240VAC
- Clear display of sensor values in Uni-Display
- Data logger function with date stamp
- Data storage on microSD in CSV format
- Menu navigation in German, English, Italian, Spanish and French
- Updates of the sensor firmware with the help of the UNI-Display
- Saving and transferring parameters to other units
Related Products
PPU
- The power unit for connecting your pump
- Housing prepared for mounting incl. 2 top-hat rails
- 3x M20 and 2x M32 cable glands
- IP66 ABS plastic housing
- Brand components
- Main switch 3-pole 25A/63A lockable
- 2 push-buttons and 2 operation indicators depending on version
- Overload relay
- Motor contactor
- Terminal strip depending on version
- From a power of 3.0 KW, soft starters are available instead of a motor contactor. This protects the pump during start-up and run-down and prevents water hammer.
- Option phase protection relay
- Option insulation monitor
- Option soft starter
- PTC tripping device option
UNI DISPLAY
- standardized platform for different pressure-temperature and fill levelsensor
- SD-Card slot for process (Datalogger) for firmware updates
- devices of the series PTM, HFT, HFB or UFM are mountable
- incl. SD-card and transparent cover
- illuminate display
- parameter copy function
- protection of your pump
- Alarm signal before pump failure
Bistable switch: BZE set
- Contactless level detection
- low investment costs
- Simple and quick assembly
NIS
- 1 to 4 switching points
- diaphragm pressure switch without medium contact
- pressure transmission by air
- low switching pressure
- corrosion resistant materials
- for unpressurised containers and pits
- process automation, e.g. as an optical or acoustic signal
- potential-free switching contacts
- does not require a power supply
CFP
- compact design with integrated relay
- for conductive media
- 2 or 3 electrode rods made of 1.4571 stainless steel for 1 or 2 filling levels
- simple installation by G 1˝ housing thread or DN 25 tube clamp
- operation voltage 24 VDC / casing head IP 67
HFT-C 2
- hydrostatic level control
- ideal for foaming media
- as suspended probe (FLEX) with 7 / 12 m FEP cable or as compact version for direct connection with the tank
- Standard 2-wire 4..20mA current loop
- an additional voltage supply is not necessary
tinyPTM-C2
- Ideal as a dry run protection device for pumps and for process monitoring
- Pressure range from 0-0.5 up to 0-10 bar
- robust design
- high accuracy
- resistant to aggressive media
PTM-C2
- Ideal as a dry run protection device for pumps and for process monitoring
- Pressure range from 0-0.5 up to 0-10 bar
- robust design
- high accuracy
- resistant to aggressive media
MOT-C2
- Magnetostrictive measuring principle
- Continuous measurement of the filling level in liquids
- Absolute and accurate method of measurement
- Stable and reliable measurements even in difficult environments
- Installation opening for ¾ inch and 2 inch
- Available in small sensor length increments
- Tank screw connection infinitely adjustable in height
NX
- X-CLASS is the beginning of a new generation of powerful heavy-duty plastic pumps
- Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It can withstand anything.
- Plastic standard pump for chemicals
- Extreme resistance
- Maximum safety
- Long-lived and sturdy
- Significantly improved service life
BE
- STÜBBE E-CLASS: entry-level model in the STÜBBE pump family
- horizontal, single-stage centrifugal chemical plastic pump with mechanical seal in monobloc design (not self-priming)
- efficient hydraulics due to up-to-date calculation programs
- best possible price/performance ratio for elementary pumping tasks
- self-developed, innovative mechanical seal module kit (static pressure up to 6 bar)
- replaceable pump casing parts are made of solid plastic
- easy disassembly and assembly
- reduction of parts due to modular system
- solids load up to max. 5%
- viscosity up to max. 100 mm2/s
- operating temperature: PP up to max. 80 °C / PVDF up to max. 100 °C
SHM
- Magnetically coupled pump with a wide range of performance up to 7.5 kW
- hermetically sealed hydraulic part
- reliable coupling by strong magnet systems
- compact design
- PVDF-Versions for demanding applications
- good availability due to modular design
SHB
- Horizontal single-stage spiral cased pump
- Shaft sealing through single or double acting mechanical seal
- Circulation, rinsing, quench or barrier medium depending on application
- Made of sturdy plastic components, ensuring excellent operating reliability even under extreme operating conditions
- Broad range of applications through diverse construction and material combinations
- Closed impeller
- Impeller fastening independent of rotational direction with fluid-proof encapsulation
- Stainless steel screws (1.4301)
- Corrosion protection through 2-component protective paint